Shelter Floor Paint White 1 Kg

Shelter Floor Paint is a technically advanced solution for floor surfaces exposed to consistently high mechanical, chemical, and hygienic requirements. It has been specifically developed for heavily used substrates and provides a durable, resilient, and easy-to-maintain surface seal for interior areas and selected exterior applications.

Due to its high abrasion resistance, the epoxy resin floor paint is ideally suited for areas with regular pedestrian or equipment traffic. At the same time, it offers excellent resistance to disinfectants, making it particularly suitable for shelters, technical rooms, operational areas, or hygiene-sensitive zones. The sealed, glossy surface prevents moisture and dirt penetration and enables simple, efficient cleaning.

Thanks to its high covering capacity, an even, streak-free surface appearance can be achieved after only a few coats. The coating applies smoothly, has low odor during application, and can be safely applied using a roller or brush. This makes it suitable for both professional use and technically experienced private users.

The epoxy resin floor coating is available in white with a high degree of whiteness as well as anthracite. Both colors support a functional, clean, and permanently high-quality appearance – especially in security-relevant or technically used areas.

Properties

• High coverage: Even, streak-free finish

• Chemically stable & durable: Resistant to disinfectants

• High abrasion resistance: Suitable for heavily used floor surfaces

• Low odor: Pleasant during application

• Glossy surface: Classified according to DIN EN 13300

Areas of Application

Suitable as a durable floor and tile coating for interior areas as well as selected exterior applications:

• Shelters

• Concrete, screed, and tiled floors

• Technical and operational rooms

• Swimming pools (in combination with suitable waterproofing slurry)

• Exterior balconies

• Concrete roof tiles and other mineral substrates

Application

• Stir the material thoroughly before use
• Mixing ratio: 9:1 (e.g., 1 kg coating + 0.09 kg hardener)
• Add the hardener component and mix thoroughly again
• Add a maximum of 2% water if required
• Do not apply at temperatures below 10 °C or above 25 °C
• Application quantity: approx. 200–250 g/m² per coat
• Recommended: 2–3 coats
• Surface dry after approx. 12 hours (at 20 °C / 65% relative humidity)
• Application by brush or roller

Package Sizes

• 1 kg (coating) + 0.09 kg hardener
• 2.5 kg (coating) + 0.225 kg hardener

Storage & Shelf Life

• Store in a cool, frost-free location
• Store in a cool, frost-free location
• Keep opened containers tightly sealed and use promptly